Inflatable / October 10, 2018 / Zurie Chandonnet
The fabrics that produce inflatable boats are very light in weight. For Sea Eagle inflatable dinghy SE 9 it is only weight 38lbs for the boat and 74lbs for boat floorboard and motor mount(For your info SE 9 could be loaded with 1200lbs or 5 adults).Using the comparison of as light as air in inflatable boats is no over-exaggerated. The light weight of inflatable boats makes inflatable boats launch easier. Only 2 adults are needed to carry out the inflatable boat from water after using. The light weight of inflatable boats just makes people love inflatable boats more.
Delivery in any closed van or pickup truck (with products securely fastened down) would do. Before you can start actually setting up an inflatable product you should be very confident that you KNOW how to setup and operate your moon bounce. You might want to check how many tie downs are required weight of each tie down electricity requirements weight capacity and so forth. Now once you have arrived at your setup location you should first examine the area to make sure there will be enough flat evened space with no overhead objects. Once this has been satisfied you can begin rolling out your product as designated in the owners manual.
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.