Inflatable / September 14, 2018 / Jolie Robert
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.
New Jersey and Pennsylvania are the toughest states to have an inflatable rental company but they are leading the way on safe operation of inflatable products. This article will discuss some of the latest safety practices that will ensure a damage and injury free party rental. Inflatables have different names such as bounce houses jumpers moonwalks moon bounces and so forth and are used interchangeably in this article. Every jumper rental company and operator should start off with reading the manufacturers owners manual the day they receive their inflatable products.
Delivery in any closed van or pickup truck (with products securely fastened down) would do. Before you can start actually setting up an inflatable product you should be very confident that you KNOW how to setup and operate your moon bounce. You might want to check how many tie downs are required weight of each tie down electricity requirements weight capacity and so forth. Now once you have arrived at your setup location you should first examine the area to make sure there will be enough flat evened space with no overhead objects. Once this has been satisfied you can begin rolling out your product as designated in the owners manual.