Inflatable / October 2, 2018 / Esperanza Langlais
New Jersey and Pennsylvania are the toughest states to have an inflatable rental company but they are leading the way on safe operation of inflatable products. This article will discuss some of the latest safety practices that will ensure a damage and injury free party rental. Inflatables have different names such as bounce houses jumpers moonwalks moon bounces and so forth and are used interchangeably in this article. Every jumper rental company and operator should start off with reading the manufacturers owners manual the day they receive their inflatable products.
If you have purchased a used product you can still inquire about getting an owners manual from the bounce house manufacturer. Usually the owners manual will display a step-by-step instruction of how to setup and teardown an inflatable product. This will also cover where the tie downs are where the enter and exits ramps are located where and when to use the product what age group it is designed for and space requirements. The details covered in an owners manual will differ from company to company since one will be more thorough or precise with clearer images than the other.
The planning dependence upon an indoor pocket of gas leads to a necessity for a really durable surface material and/or simple repair of tears and holes on the material since a puncture or tear will result within the escape of the gas inside (a leak) and also the deflation of the inflatable which depends upon the gass pressure to hold its form. Detectable leaks can be caused by holes (from punctures or tears) on the material the separating of seams the separating of valve components or an improperly close or improperly closing valve. Even if an inflatable possesses no macroscopic leaks the gas inside will usually diffuse out of the inflatable albeit at a much slower rate until equilibrium is reached while using pressure outside the inflatable.