Inflatable / February 11, 2019 / Jolie Robert.
New Jersey and Pennsylvania are the toughest states to have an inflatable rental company but they are leading the way on safe operation of inflatable products. This article will discuss some of the latest safety practices that will ensure a damage and injury free party rental. Inflatables have different names such as bounce houses jumpers moonwalks moon bounces and so forth and are used interchangeably in this article. Every jumper rental company and operator should start off with reading the manufacturers owners manual the day they receive their inflatable products.
If youve owned one of the older cheaper style inflatable boats you know you also have to invest in repair patches or a roll of duct tape. New high quality inflatable kayaks are changing peoples impressions of inflatable boats. New inflatable crafts are made from puncture and abrasion resistant rubber often reinforced with polyester fabric. This is much stronger than the PVC material used for most cheap inflatable boats. Under normal circumstances it is quite unlikely that you would puncture these new rubber materials. Even if you did most inflatable kayaks have at least three separate air chambers.
The fabrics that produce inflatable boats are very light in weight. For Sea Eagle inflatable dinghy SE 9 it is only weight 38lbs for the boat and 74lbs for boat floorboard and motor mount(For your info SE 9 could be loaded with 1200lbs or 5 adults).Using the comparison of as light as air in inflatable boats is no over-exaggerated. The light weight of inflatable boats makes inflatable boats launch easier. Only 2 adults are needed to carry out the inflatable boat from water after using. The light weight of inflatable boats just makes people love inflatable boats more.
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.