Inflatable / February 17, 2019 / Melodie Mainville
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.
Once all anchors are fastened and the inflatable is fully inflated the delivery person can now check to make sure that wires are not causing a tripping hazard there are no sharp objects protruding near or on the inflatable there are no overhead power lines and so forth. Making sure every precautions are taken to ensure safety. Most often than not an injury will occur when a delivery person gets too careless about setting up the inflatable and doesnt follow all the safety steps. Inflatable products should never be used during certain weather conditions. Winds over 20-25 miles per hour can cause the inflatable to move or if the speed is high enough to make it airborne.
New Jersey and Pennsylvania are the toughest states to have an inflatable rental company but they are leading the way on safe operation of inflatable products. This article will discuss some of the latest safety practices that will ensure a damage and injury free party rental. Inflatables have different names such as bounce houses jumpers moonwalks moon bounces and so forth and are used interchangeably in this article. Every jumper rental company and operator should start off with reading the manufacturers owners manual the day they receive their inflatable products.