Inflatable / October 2, 2018 / Esperanza Langlais.
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.
If you have purchased a used product you can still inquire about getting an owners manual from the bounce house manufacturer. Usually the owners manual will display a step-by-step instruction of how to setup and teardown an inflatable product. This will also cover where the tie downs are where the enter and exits ramps are located where and when to use the product what age group it is designed for and space requirements. The details covered in an owners manual will differ from company to company since one will be more thorough or precise with clearer images than the other.
This type of inflatable company is easy to operate but is designed for small-scale growth. For instance renting an inflatable to a household for a childs birthday party typically only happens on weekends and the largest inflatable you can buy is one that fits nicely into a large backyard. Bouncers are the most popular inflatables to buy in this situation and ball pits are a secondary choice. Since this type of business only functions on the weekends and holidays (for the most part) this is a good investment for families who are looking to make a little extra money part time.
The planning dependence upon an indoor pocket of gas leads to a necessity for a really durable surface material and/or simple repair of tears and holes on the material since a puncture or tear will result within the escape of the gas inside (a leak) and also the deflation of the inflatable which depends upon the gass pressure to hold its form. Detectable leaks can be caused by holes (from punctures or tears) on the material the separating of seams the separating of valve components or an improperly close or improperly closing valve. Even if an inflatable possesses no macroscopic leaks the gas inside will usually diffuse out of the inflatable albeit at a much slower rate until equilibrium is reached while using pressure outside the inflatable.