Inflatable / February 8, 2019 / Iva Gabriaux
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.
Inflatables came very much into the public eye as architectural and domestic object when synthetic material became commonplace. Iconic structures like the US Pavillion on the 1970 Osaka Expo by Davis and Brody and Victor Lundys travelling pavillion for that Atomic Energy Commission popularized the idea that inflatables can be a way to build large structures with very extendend interior spans without pillars. These nice hopes for inflatable structures would later be dashed by the many practical difficulties faced by inflatable buildings such as climatization safety sensitivity to wind and fire proofing that currently restrict their use to very particular circumstances.
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.