Inflatable / January 9, 2019 / Searlait Bureau
But as with most things in life things change. In the last five years most U.S. "manufacturers" have thrown in the towel and are no longer making their own Inflatables. Theyre now importing China made Inflatables and passing them off as "Made in the U.S.A." In addition a new breed of internet phonies are posing as "manufacturers" and selling "China made Inflatables" or acting as a distributor for some other inflatable company importing from China. The fact of the matter is there are only a few manufacturers left that still build their entire product line of Inflatables right here in the good old U.S.A. Its more expensive but far superior in durability. And yes in spite of what you have been told there is a big difference in Safety Quality Craftsmanship.
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.