Inflatable / January 9, 2019 / Searlait Bureau
Delivery in any closed van or pickup truck (with products securely fastened down) would do. Before you can start actually setting up an inflatable product you should be very confident that you KNOW how to setup and operate your moon bounce. You might want to check how many tie downs are required weight of each tie down electricity requirements weight capacity and so forth. Now once you have arrived at your setup location you should first examine the area to make sure there will be enough flat evened space with no overhead objects. Once this has been satisfied you can begin rolling out your product as designated in the owners manual.
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.