Inflatable / February 4, 2019 / Iva Gabriaux
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.
If you have purchased a used product you can still inquire about getting an owners manual from the bounce house manufacturer. Usually the owners manual will display a step-by-step instruction of how to setup and teardown an inflatable product. This will also cover where the tie downs are where the enter and exits ramps are located where and when to use the product what age group it is designed for and space requirements. The details covered in an owners manual will differ from company to company since one will be more thorough or precise with clearer images than the other.
Once all anchors are fastened and the inflatable is fully inflated the delivery person can now check to make sure that wires are not causing a tripping hazard there are no sharp objects protruding near or on the inflatable there are no overhead power lines and so forth. Making sure every precautions are taken to ensure safety. Most often than not an injury will occur when a delivery person gets too careless about setting up the inflatable and doesnt follow all the safety steps. Inflatable products should never be used during certain weather conditions. Winds over 20-25 miles per hour can cause the inflatable to move or if the speed is high enough to make it airborne.