Inflatable / February 13, 2019 / Searlait Bureau
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.
The large size buoyancy tubes provide a low center of gravity for the boats as well. These designs make inflatable boats sit flat on the water surface making inflatable boats almost impossible to flip over. For example 435ps paddle ski from sea eagle give ultimate stability. Comparing with normal paddle canoe it is mush more stable due to the two separate buoyancy tubes on two different sides. The features of inflatable boats just best suit those who like to stand up fishing and those scuba divers who need to flip backward to the water as well as pulling up themselves from water.
Once all anchors are fastened and the inflatable is fully inflated the delivery person can now check to make sure that wires are not causing a tripping hazard there are no sharp objects protruding near or on the inflatable there are no overhead power lines and so forth. Making sure every precautions are taken to ensure safety. Most often than not an injury will occur when a delivery person gets too careless about setting up the inflatable and doesnt follow all the safety steps. Inflatable products should never be used during certain weather conditions. Winds over 20-25 miles per hour can cause the inflatable to move or if the speed is high enough to make it airborne.