Inflatable / January 17, 2019 / Melodie Mainville
The planning dependence upon an indoor pocket of gas leads to a necessity for a really durable surface material and/or simple repair of tears and holes on the material since a puncture or tear will result within the escape of the gas inside (a leak) and also the deflation of the inflatable which depends upon the gass pressure to hold its form. Detectable leaks can be caused by holes (from punctures or tears) on the material the separating of seams the separating of valve components or an improperly close or improperly closing valve. Even if an inflatable possesses no macroscopic leaks the gas inside will usually diffuse out of the inflatable albeit at a much slower rate until equilibrium is reached while using pressure outside the inflatable.
All it requires is a prime location a large indoor space and a series of inflatables to fill the space. Because of its indoor nature these companies dont experience the same problems with sun damage and accidental punctures that outdoor rental companies face. However with constant use comes typical wear and tear so be prepared to have backup inflatables for replacements while used inflatables are patched and repaired. Also the cost of a large enough rental space will be rather high as well as the cost of utilities and maintenance. So as you can see there are four main options if you want to start an inflatables business.
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.