Inflatable / January 18, 2019 / Sydney De La Ronde
A manufacturing company that is known to have a very detailed and helpful owners manual is Magic Jump Inc. located out of Burbank CA USA. Once you are educated in the setup and takedown process you should now focus on the product and how to operate it for a real party occasion. First and foremost before you take the inflatable to any party it must be thoroughly checked to see if there are any damages that should be patched or repaired. Damaged products should NEVER be rented out since they can easily cause damage to participants. Now it is time to deliver and actually setup the moonwalk.
The planning dependence upon an indoor pocket of gas leads to a necessity for a really durable surface material and/or simple repair of tears and holes on the material since a puncture or tear will result within the escape of the gas inside (a leak) and also the deflation of the inflatable which depends upon the gass pressure to hold its form. Detectable leaks can be caused by holes (from punctures or tears) on the material the separating of seams the separating of valve components or an improperly close or improperly closing valve. Even if an inflatable possesses no macroscopic leaks the gas inside will usually diffuse out of the inflatable albeit at a much slower rate until equilibrium is reached while using pressure outside the inflatable.
Next you should tightly secure the blower(s) to the inflatable tube(s) and close any other inflation tubes. Now you should check to see if the location has an electricity outlet with a GFI box. Refer back to the blower manufacturers owners manual to check the correct electricity requirements extension cord type generator information etc. Now once the electricity requirements have been satisfied you can inflatable the product. After the product is fully inflated you will need to fasten all of the tie downs using the correct required stakes to anchor the inflatable into position.